Characterization of Tannery Effluent and Efficiency Assessment of Central Effluent Treatment Plant (CETP) at Savar in Bangladesh

Authors

  • U. Monira Institute of Environmental Science, University of Rajshahi, Bangladesh
  • G. S. Sattar Institute of Environmental Science, University of Rajshahi, Bangladesh
  • Md. Golam Mostafa Institute of Environmental Science, University of Rajshahi, Bangladesh

DOI:

https://doi.org/10.51983/ajsat-2023.12.1.3511

Keywords:

CETP, Effluent, Heavy Metals, Pollutants, Tannery

Abstract

The industry discharges a large volume of effluent, many of which contain lots of chemicals and toxic substances that have the potential to cause distress to the environment. The study focused on analyzing various physicochemical parameters of the effluent discharge from the Central Effluent Treatment Plant (CETP) at the Savar Tannery Industrial Zone. The effluent was collected four times (pre-monsoon, monsoon, and post-monsoon) a year, from 2021-2022. The effluent was inspected for vital water quality parameters, such as pH, COD, BOD, TDS, TSS, NO3-, SO42-, HCO3-, PO43-, Cl-, Na, Ca, Cr, Fe, Cu, Zn, and Pb. Most of the parameters exceed the standard permissible limit of the Department of Environment, Bangladesh (DoE, BD), NQES, and ISW-BDS for inland water. The mean concentrations of COD, BOD, TSS, and Cr were 337, 97.5,  209, and 6.1 mg/L, and these values were far above the permissible limit with a removal efficiency of 51%. The study observed that industrial discharge of unproperly treated effluent deteriorates the surface water quality and causes huge threats to aquatic life and sustainable water resource management.

References

J. C. Akan, F. I. Abdulrahman, J. T. Ayodele, and V. O. Ogugbuaja, "Impact of tannery and textile effluent on the chemical characteristics of Challawa River, Kano State, Nigeria," Aust J. Basic Appl Sci., vol. 3, no. 3, pp. 1933-1947, 2009.

J. C. Akan, E. A. Moses, and V. O. Ogugbuaja, "Assessment of tannery industrial effluent from Kano metropolis, Kano State, Nigeria," Journal of Applied Sciences, vol. 7, no. 19, pp. 2788-2793, 2007.

APHA (American Public Health Association), "Standard Methods for the Examination of Water and Wastewater," 20th ed. APHA, Washington, DC, USA, 1998.

APHA-AWWA-WPCF, "Standard Methods for the Examination of Water and Wastewater," American Public Health Association, Washington, D. C. 20th ed., New York, 2005.

M. Bosnic, J. Buljan, and R. P. Daniels, "Regional program for pollution control in the tanning industry" US/RAS/92/120 in Southeast Asia, pp. 1-14, 2000.

M. Chowdhury, M. G. Mostafa, T. K. Biswas, and A. K. Saha, "Treatment of leather industrial effluent by filtration and coagulation processes," Water Res Ind., vol. 3, pp. 11-2, 2013.

M. Chowdhury et al., "Characterization of the effluent from leather processing industries," Environ. Process, vol. 2, no. 5, pp. 173-187, 2015.

J. Connolly et al., "Mixed‐gender groups, dating, and romantic relationships in early adolescence," Journal of research on adolescence, vol. 14, no. 2, pp. 185-207, 2004.

EPA, "Environmental Standards for Tannery effluent," EPA notification (G.S.R742 (E), 30th August 2021.

P. K. Ghosh and M. D. Hossain, "Assessment of Tannery Effluent: A Case Study on Dhaleshwari River in Bangladesh," Proceedings of International Conference on Planning, Architecture and Civil Engineering, 07-09 February 2019, Rajshahi University of Engineering & Technology, Rajshahi, Bangladesh, 2019.

S. N. Hossain and A. S. Abedin, "Addressing the Impacts of Tannery Wastes on Soil Condition of Tetuljhora and Hazratpur Union: A Management Perspective," 2019.

M. Islam and M. G. Mostafa, "Influence of chemical fertilizers on arsenic mobilization in the alluvial Bengal delta plain: a critical review," Journal of Water Supply: Research and Technology-Aqua, vol. 70, no. 7, pp. 948-970, 2021.

M. R. Islam and M. G. Mostafa, "Characterization of textile dyeing effluent and its treatment using polyaluminum chloride," Applied Water Science, vol. 10, no. 5, pp. 1-10, 2020.

M. R. Islam and M. G. Mostafa, "Textile dyeing effluent and environment concerns-a review," Journal of Environmental Science and Natural Resources, vol. 11, no. 1-2, pp. 131-144, 2018.

B. I. Islam, A. E. Musa, and E. H. Ibrahim, "Evaluation and characterization of tannery wastewater," J. Forest Prod. Ind., vol. 3, pp. 141-150, 2014.

ISW-BDS-ECR, "Ministry of Environment and Forest, Inland Surface Water in Bangladesh," Gazette notification, 27, Aug 1997.

M. Javed, "Heavy metal contamination of freshwater fish and bed sediments in the. Pak," J. Biol Sci., vol. 8, no. 10, pp. 1337-1341, 2005.

B. A. Mollik, "Bangladesh’s leather industry," Available at SSRN 4044704, 2022.

Monira U., G. S. Sattar, and M. G. Mostafa, "Characterization of Tannery Effluent of Savar Tannery Estate in Bangladesh," Bauet Journal, vol. 3, no. 2, 2022.

Monira U., G. S. Sattar, and M. G. Mostafa, "Characterization and Removal Efficiency of Central Effluent Treatment Plant (CETP)," Journal of Sustainability and Environmental Management (JOSEM), 2023.

NEQS, "National Environmental Quality Standards for municipal and liquid industrial effluent," [Online]. Available: http://www.emc.com. pk/pdf/3-NEQS(New).pdf, 2000.

A. Pandey, "Solid-state fermentation," Biochemical engineering journal, vol. 13, no. 2-3, pp. 81-84, 2003.

D. Plooy et al., "Cultivation and enrichment of Anammox culture in a submerged membrane bioreactor," Water: Journal of the Australian Water Association, vol. 41, no. 2, pp. 132-138, 2014.

K. E. Priya, "Biodegradation of tannery effluent using native fungus Penicillium sp. B.Sc Dissertation," University of Madras, 2010.

M. A. Rouf et al., "Characterization of effluent of leather industries in Hazaribagh area of Dhaka city," Bangladesh J. Sci. Ind. Res., vol. 48, no. 3, pp. 155-166, 2013.

B. Saritha and T. P. Manikandan, "Treatability study of tannery effluent by enhanced primary treatment," Int. J. Mod. Engin. Res., vol. 3, no. 1, pp. 119-122, 2013.

A. Shannon et al., "Remdesivir and SARS-CoV-2: Structural requirements at both nsp12 RdRp and nsp14 Exonuclease active-sites," Antiviral research, vol. 178, pp. 104793, 2020.

M. S. Shakil and M. G. Mostafa, "Paper industries concern water pollution: A review," International Journal of Innovative Research and Review, vol. 9, pp. 19-31, 2021.

M. S. Shakil and M. G. Mostafa, "Water Quality Assessment of Paper Mills Effluent Discharge Areas," Al-Nahrain Journal of Science, vol. 24, no. 3, pp. 63-72, 2021.

P. Trivedi, A. Bajpai, and S. Thareja, "Evaluation of water quality: physico-chemical characteristics of Ganga River at Kanpur by using correlation study," Nature and Science, vol. 1, no. 6, pp. 91-94, 2009.

P. G. Whitehead et al., "A New Multibranch Model for Metals in River Systems: Impacts and Control of Tannery Wastes in Bangladesh," Sustainability, vol. 13, pp. 3556. DOI: https://doi.org/10.3390/su13063556, 2021.

WHO, "Rapid Assessment of sources of Air, Water and Land pollution," Offset Publication, no. 62, pp. 7, 1982.

I. C. Yadav et al., "Concentration and spatial distribution of organophosphate esters in the soil-sediment profile of Kathmandu Valley, Nepal: implication for risk assessment," Science of the Total Environment, vol. 613, pp. 502-512, 2018.

Downloads

Published

13-05-2023

How to Cite

Monira, U., Sattar, G. S., & Golam Mostafa, M. (2023). Characterization of Tannery Effluent and Efficiency Assessment of Central Effluent Treatment Plant (CETP) at Savar in Bangladesh. Asian Journal of Science and Applied Technology, 12(1), 48–53. https://doi.org/10.51983/ajsat-2023.12.1.3511